Classified by SuperMicro as a SuperWorkstation, the 7046T-6F server supports up to 192GB of DDR3 ECC registered memory or up to 48GB of DDR3 ECC / Non ECC unbuffered memory. If you need to replace damaged memory modules or want to add to your onboard reserve of memory, Memory America has compatible SuperMicro SuperServer memory modules in stock at great prices. The 7046T-6F server has 12 DIMM sockets available for memory in DIMM sizes ranging from 1GB to 16GB. This server supports memory that is 1.5V as well as low voltage modules of 1.35V. In addition to supporting unbuffered and ECC-registered memory, the 7046T-6F server also supports multiple memory types, so you can choose to use PC3-8500, PC3-10600 or PC3-12800 DIMMs. If you are contemplating a SuperServer RAM upgrade, there are several things o keep in mind in order to achieve a successful upgrade. Other than capacity size, the DIMM modules must be identical including voltage. If your system currently uses PC3-8500 DIMMs that are 1.5V for example, all new DIMMs that you buy from Memory America must be PC3-8500 1.5V. Your server will not function properly when multiple types of memory modules are used at the same time and the server can be damaged if the memory installed operates at different voltages. Your task will be easier if you are simply replacing damaged memory modules. In those cases, you just need to uninstall the faulty DIMMs and order new modules that have the same characteristics. If you want to replace all of your original DIMMs with new, faster DIMMs-substituting original PC3-8500 modules with PC3-12800 DIMMs for example-you can order the necessary amount of modules and follow the rules for positioning the DIMMs that can be found in the owner’s manual.
All of the DIMMs at Memory America are new and have been pre-tested to guarantee compatibility with your system. All modules come with a lifetime warranty and Memory America has a 30-day money back guarantee policy in place if you are not satisfied with your order.