- DDR3 PC3-8500
- Non-ECC / Non-Registered
- 512M x 64
240-pin DIMMs are used in DDR3 memory for desktop computers. DDR3 is the latest generation of memory with an improved architecture that allows it to transmit data more quickly.
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). Standard DDR3 240-pin DIMMs are currently available in DDR3 PC3-8500 SDRAM. Additional speeds will be added as the technology becomes available.
To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins.
Kingston Technology Company, Inc.
- 17600 Newhope Street
- Fountain Valley, CA 9270
- General Contact Information
Toll-Free: +1 (877) KINGSTON
+1 (877) 546-4786
Phone: +1 (714) 435-2600
Fax: +1 (714) 435-2699
- Return for refund within: 30 days
- Return for replacement within: lifetime
For a return for credit, this item must be returned to Memory America within 30days of the invoice date for this policy to apply. For a replacement, we offer a Lifetime warranty and support on all memoryupgrades. “Return” constitutes receipt of the product by Memory America, and not the mere issuance of an RMA.
The following conditions are not acceptable for return, and will result in the merchandise you have returned to Memory America being returned to you:
- Modules exhibiting physical damage
- Modules that are missing the manufacturer label containing model number, part number or serial number
- Modules that are missing the manufacturer warranty label
Will ecc memory work on a non ecc motherboard?
ECC Memory has an extra chip on the memory that performs Error Checking and Correcting functions. It's really only recommended for machines being used asservers.
For home systems, non-ECC memory is recommended unless you KNOW you need the ECC function. This is because ECC and non-ECC memory can almost always be mixedin the same system with no problems. If you mix these types of memory, the system will run as if all the memory was non-ECC.
Non-ECC memory is also recommended because it runs a little faster than ECC memory since it doesn't need to do the extra error checking. ECC memory is onlyreally beneficial if you're going to be processing massive amounts of data (like a server does) and all data needs to be 100% accurate. Non-ECC is all that'sneeded for 99% of the computers out there.
What is registered memory?
A memory module that contains registers that hold the data for one clock cycle before it is moved on to the motherboard. This process increases thereliability of high-speed data access. Registered memory modules are typically used only in servers and other mission-critical systems where it is extremelyimportant that the data is properly handled.