1GB RAM Memory Upgrade DDR-333MHz, PC2700, SODIMM SD1GB33MPB

Specifications:

• 128Meg x 64

• SO Dimm 200-Pin

• PC2700

• CL=2.5

• 333MHz

• 2.5V

MemoryAmerica 1GB RAM Memory Upgrade DDR-333MHz, PC2700, SODIMM SD1GB33MPB memory upgrades are of high quality and reliability. All MemoryAmerica modules are manufactured to meet or exceed OEM specifications.

We make sure that all of our modules are manufactured to be fully compatible with your system and has been pre-tested to ensure quality control.

Our knowledgeable staff is available to help with any technical questions you may have about this 1GB RAM Memory Upgrade DDR-333MHz, PC2700, SODIMM SD1GB33MPB or related issues.

This module may be manufactured by Samsung Hynix Micron Elpida Qimonda Infineon Nanya Aeneon or Memory America.This module is in stock and can ship today.

Memory spec terms
If you're not sure if a module is right for your system, use Memory America configurator for a list of guaranteed compatible modules.

NON-ECC/Non-parity — Most desktop and laptop computers take NON-ECC or Non-parity memory.

ECC/Parity — ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.

Unbuffered — Most PCs and workstations use unbuffered memory which is faster than registered memory.

Registered/Buffered — Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.

Fully buffered — Designed for next-generation servers, features an advanced memory buffer.

CL — CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.

Component configuration — (For example: 64Meg x 64) Indicates the size of the memory chip components on the module.

Voltage — For example 2.6V. Indicates the power used by the module. The lower the better.

Check the glossary and FAQs for more detailed definitions.

Memory Return Policy

Return for refund within: 30 days
Return for replacement within: lifetime

For a return for credit, this item must be returned to Memory America within 30 days of the invoice date for this policy to apply. For a replacement, we offer a Lifetime warranty and support on all memory upgrades. “Return” constitutes receipt of the product by Memory America, and not the mere issuance of an RMA.

The following conditions are not acceptable for return, and will result in the merchandise you have returned to Memory America being returned to you:

Modules exhibiting physical damage
Modules that are missing the manufacturer label containing model number, part number or serial number
Modules that are missing the manufacturer warranty label

DDR SDRAM

Double Data Rate synchronous dynamic random access memory (or also known as DDR SDRAM) is a class of memory integrated circuits used in computers. It achieves nearly twice the bandwidth of the preceding single data rate (SDR) SDRAM by double pumping (transferring data on the rising and falling edges of the clock signal) without increasing the clock frequency.
With data being transferred 64 bits at a time, DDR SDRAM gives a transfer rate of (memory bus clock rate) x 2 (for dual rate) × 64 (number of bits transferred) / 8 (number of bits/byte). Thus, with a bus frequency of 100 MHz, DDR SDRAM gives a maximum transfer rate of 1600 MB/s.
"Beginning in 1996 and concluding in June 2000, JEDEC developed the DDR (Double Data Rate) SDRAM specification (JESD79)."[1] JEDEC has set standards for data rates of DDR SDRAM, divided into two parts. The first specification is for memory chips, and the second is for memory modules. As DDR SDRAM is superseded by the newer DDR2 SDRAM, the older DDR version is sometimes referred to as DDR1 SDRAM.